SolarPanelMatch
Corona · Riverside County · California

Solar installers in Corona, CA

Tell us about the solar job, and we'll send it to one solar installer that works Corona.

What to watch for here: Corona offers expedited plan check for solar of 10 kW or smaller and Symbium permits.

Residents
158,839
Homes pre-1980
25%
Median home value
$656,500

Census figures: ACS 2023 five-year estimates (B01003, B25034, B25077).

Get matched with a solar installer in Corona

Pick the job, give your ZIP code, then add how we should reach you; all three steps are free.

What do you want done?
Something else · all 11 services

The form asks for a phone number only after it finds an installer that covers your ZIP.

You pay nothing, and the installer that gets your request pays us. How it works

Solar in Corona

Corona's Building Division lists residential solar photovoltaic of 15 kW or less in Table D, Electrical Fees (printed effective October 4, 2026). The table shows $368.00 for plan check only, $187.00 for inspection only and $555.00 total, with $17.00 total for each kW above 15 kW. The city runs its own routes: expedited solar plan check forms for central-inverter or microinverter systems of 10 kW or smaller, and Symbium solar permits.

It isn't on the SolarAPP+ list. Forms go in electronically through eTRAKiT, and plan check doesn't start until the plan check fee payment is confirmed. Before work starts, the Expedited Permits page says the address needs its own application and approval from the electric utility, either Southern California Edison or the Corona Utilities Department (951-279-3677). Corona Utilities doesn't allow Tesla Backup Switch type devices attached to the meter, which matters if your quote includes a battery with that kind of switch.

On the Energy Commission's layer, SCE holds the center of Corona and the City of Riverside's utility touches the edge, so read which provider is on your bill. Corona's Building Division offices are at City Hall, 400 S. Vicentia Ave., 951-736-2250, open Monday to Thursday 7 AM to 6 PM and closed Friday. Ask the installer which utility it's applying to and whether the battery hardware it quoted connects at the meter.

What solar costs near Corona

No installer has quoted us a Corona job, so this page gives no city price. The California page lists the estimates with what solar installers are paid ($30.42 an hour in the BLS wage data, which is pay, not price) and the utility application fees. How we estimate costs.

Licenses and permits for solar in Corona

In California a solar system goes on a house under a CSLB license: A, B, C-10 Electrical or C-46 Solar. Under Gov. Code 65850.5 the city or county approves a residential solar permit administratively, and under Gov. Code 66015 its fee is capped at $450 plus $15 per kW above 15 kW unless it adopts a written finding. The utility's interconnection application comes on top of the permit.

Sources for Corona

  1. City solar permit page, Corona Read Oct 23, 2026.
  2. Table D Electrical Fees (City of Corona Building Division) Read Oct 23, 2026.
  3. Expedited Permits (City of Corona Building Division) Read Oct 23, 2026. Confirm with the source before you rely on it.
  4. Building Fees, City of Corona Read Oct 22, 2026.
  5. California Energy Commission Electric Load Serving Entities (IOU and POU) Confirm with the source before you rely on it.
Thinking about solar, or need work on a system you have?Say what you need, and one solar installer that works Corona will call you back.
Get matched
Get matched